West Island
Lun-Ven / Mon-Fri 8:30am–7:00pm
Sam-Dim / Sat-Sun: 10:00am–5:00pm


Problems with your Maytag Bravos MCT washer, whether it’s a top-loading model or some other type, are more common than you might think. After a few months of heavy use, it’s not uncommon to experience malfunctions related to fault codes or a lid that refuses to lock properly. These problems can be due to a variety of causes, such as a power supply problem, a faulty part in the tank, or even a problem with the wash cycle refusing to go into spin mode. In addition, hearing a click without the cycle reaching its end of the cycle is frustrating and often signals a problem. It is essential to want to carry out an accurate diagnosis of your appliance, whether it is a washing machine, a refrigerator, or a dishwasher of the LG brand or others, to identify the reasons why it does not start or has abnormalities. Bravo for your patience and perseverance. In this article, you’ll find out how to fix common problems with your Maytag washer, a must-have guide to keeping your appliances in good working order.


Power supply issue with your Maytag washer

If your machine does not have any indicator light signal, it is imperative to check the electrical connection very quickly. Indeed, it is necessary to ensure the non-existence of a malfunction at the level of the circuit breaker and the actual circulation of the current in the socket. To perform this check, you could plug in another device to test the electrical outlet. If the problem persists, call a specialist in installation and repair of household appliances.

The electronic card is faulty

The electronic board is the manager of all the electrical functions of your device. Its role in the start of laundry seems undeniable. In the event of a failure, it can therefore prevent your machine from working. You can change the electronic board, but the presence of a washer repair expert will make all the difference. When one part is damaged, the entire circuit is damaged, because one does not go without the other. It is therefore useful to go through all the constituent elements in order to detect the possible cause of the malfunction. Some problems, on the other hand, can find their source in the lack of maintenance.

How to maintain your washer?

Maintenance is the most important step in any acquisition. Be sure to use the right detergent for your washer by strictly following the instructions for use. It is also advisable to load the detergent tray with more care, depending on whether it is a powdered or liquid detergent. Among other things, the diagnosis before repair of the washer can also identify the door as the cause of the start-up problem.

The door does not close

Every washing machine device has a porthole consisting of a safety system that prevents starting if the door is not hermetically closed. In this case, check its effective closure. If the problem continues, you need to renew the security system. Some very simple tips can help you stop paying money for a new acquisition. One of the tips and opening the door for air circulation.

Opening the door for air circulation

The risk of spore multiplication is reduced when the door remains open after laundry. Note that the seal of it must be dry to avoid its rapid deterioration.

The washing program is incorrectly selected

The proper verification of all the features of the washer is important and the selection of the program of the latter is a necessary step. You have the rotation selector for one and the start button for the other. If some programs work besides the latter then it is probably damaged. The remaining parts must be checked by a washer dryer repair expert to detect the cause.

The solenoid valve, resistor or motor no longer works

The defect of several other parts of the washer can cause it to fail to start. These parts are the solenoid valve, the resistor and the motor.

Solenoid valve is damaged

Allowing the circulation or not of water leaks and allowing the cube to fill, the solenoid valve plays the role of electric valve without which, the distribution of water in the different compartments can not be possible. You can automatically notice a malfunction at this level since its role as a filler will not be assured. However, you should make sure that the faucet remains open. If the problem persists, it is just appropriate to change this room.

Defective resistance

It allows the water to have the necessary temperature to heat up. As long as it is not reached, the installation will remain blocked. When there is wear of the resistor, it will no longer work and can cause a current leak or disconnect the meter. Washing machines have a hot water hose that must be cleaned monthly. In the event of a leak, resort to professional repair.

The engine no longer works

Problems with your Maytag washer can be frustrating, especially when the drum rotation is entirely dependent on the motor. If your washer isn’t working properly, the cause could be related to the thermal safety of the motor that is showing signs of wear and tear. For a reliable home installation of your washer, trust our installation service in Laval. Whether you live in Montreal, Quebec or elsewhere, we’re here for you. The home washer is a handy appliance designed for laundry washing, but it can also require repairs if it fails.


Maytag Washer Problems: Solutions & Repair FAQs

Maytag washer problem

My Maytag washer won’t start at all. What can I do?

There may be a few reasons why your Maytag washer won’t start. First, make sure it’s plugged in properly and that the power cord is in good condition. Also, check that the door is closed properly, as some modern washers only start when the door is locked. Finally, make sure your home’s circuit breaker or fuse hasn’t blown. If the problem persists, it may be an internal malfunction requiring professional intervention.

Why does my Maytag washer stop during a cycle?

A Maytag washer that shuts down mid-cycle can be caused by a variety of problems. Make sure that the drain hose is not clogged and that the water is drained properly. Also, check that the water pump filter is not clogged. Overload problems can also cause the machine to stop. Make sure you don’t overload the washer. If the problem persists, it may be due to a malfunction of the load sensor or programmer, which usually requires professional repair.

My Maytag washer makes a loud noise during spinning. What can I do?

Loud noises during spinning can be caused by several factors. First, make sure the washer is level, as a wrong level can lead to excessive vibration. Also check that the load of laundry is properly distributed inside the drum. Hard objects like coins or buttons can cause loud noises if they get stuck in the drum or pump. If the noise persists, it may indicate a worn bearing or a faulty belt that will need to be replaced.

Why is my Maytag washer leaking water?

A Maytag washer water leak is a common problem. First, make sure that the hot and cold water supply pipes are properly connected and do not have any leaks. Also check the gaskets around the door and detergent drawer. If you find any leaks, replace the defective gaskets. Sometimes, a leak can be caused by a clogged or damaged drain pipe. If in doubt, call a qualified technician.

My Maytag washer won’t drain properly. How do I fix this?

A Maytag washer that doesn’t drain properly may be due to a clog in the drain hose. Start by checking the drain hose for any objects obstructing the passage. Also, make sure the drain hose is not bent or crushed. The water pump filter may also be clogged, so be sure to clean it. If the problem persists, it may be a faulty water pump that will need to be replaced. If in doubt, consult a washer repair technician to diagnose and fix the problem.