West Island
Lun-Ven / Mon-Fri 8:30am–7:00pm
Sam-Dim / Sat-Sun: 10:00am–5:00pm


Problems with your Maytag Bravos MCT washer, whether it’s a top-loading model or some other type, are more common than you might think. After a few months of heavy use, it’s not uncommon to experience malfunctions related to fault codes or a lid that refuses to lock properly. These problems can be due to a variety of causes, such as a power supply problem, a faulty part in the tank, or even a problem with the wash cycle refusing to go into spin mode. In addition, hearing a click without the cycle reaching its end of the cycle is frustrating and often signals a problem. It is essential to want to carry out an accurate diagnosis of your appliance, whether it is a washing machine, a refrigerator, or a dishwasher of the LG brand or others, to identify the reasons why it does not start or has abnormalities. Bravo for your patience and perseverance. In this article, you’ll find out how to fix common problems with your Maytag washer, a must-have guide to keeping your appliances in good working order.


Power supply issue with your Maytag washer

If your machine does not have any indicator light signal, it is imperative to check the electrical connection very quickly. Indeed, it is necessary to ensure the non-existence of a malfunction at the level of the circuit breaker and the actual circulation of the current in the socket. To perform this check, you could plug in another device to test the electrical outlet. If the problem persists, call a specialist in installation and repair of household appliances.

The electronic card is faulty

The electronic board is the manager of all the electrical functions of your device. Its role in the start of laundry seems undeniable. In the event of a failure, it can therefore prevent your machine from working. You can change the electronic board, but the presence of a washer repair expert will make all the difference. When one part is damaged, the entire circuit is damaged, because one does not go without the other. It is therefore useful to go through all the constituent elements in order to detect the possible cause of the malfunction. Some problems, on the other hand, can find their source in the lack of maintenance.

How to maintain your washer?

Maintenance is the most important step in any acquisition. Be sure to use the right detergent for your washer by strictly following the instructions for use. It is also advisable to load the detergent tray with more care, depending on whether it is a powdered or liquid detergent. Among other things, the diagnosis before repair of the washer can also identify the door as the cause of the start-up problem.

The door does not close

Every washing machine device has a porthole consisting of a safety system that prevents starting if the door is not hermetically closed. In this case, check its effective closure. If the problem continues, you need to renew the security system. Some very simple tips can help you stop paying money for a new acquisition. One of the tips and opening the door for air circulation.

Opening the door for air circulation

The risk of spore multiplication is reduced when the door remains open after laundry. Note that the seal of it must be dry to avoid its rapid deterioration.

The washing program is incorrectly selected

The proper verification of all the features of the washer is important and the selection of the program of the latter is a necessary step. You have the rotation selector for one and the start button for the other. If some programs work besides the latter then it is probably damaged. The remaining parts must be checked by a washer dryer repair expert to detect the cause.

The solenoid valve, resistor or motor no longer works

The defect of several other parts of the washer can cause it to fail to start. These parts are the solenoid valve, the resistor and the motor.

Solenoid valve is damaged

Allowing the circulation or not of water leaks and allowing the cube to fill, the solenoid valve plays the role of electric valve without which, the distribution of water in the different compartments can not be possible. You can automatically notice a malfunction at this level since its role as a filler will not be assured. However, you should make sure that the faucet remains open. If the problem persists, it is just appropriate to change this room.

Defective resistance

It allows the water to have the necessary temperature to heat up. As long as it is not reached, the installation will remain blocked. When there is wear of the resistor, it will no longer work and can cause a current leak or disconnect the meter. Washing machines have a hot water hose that must be cleaned monthly. In the event of a leak, resort to professional repair.

The engine no longer works

Problems with your Maytag washer can be frustrating, especially when the drum rotation is entirely dependent on the motor. If your washer isn’t working properly, the cause could be related to the thermal safety of the motor that is showing signs of wear and tear. For a reliable home installation of your washer, trust our installation service in Laval. Whether you live in Montreal, Quebec or elsewhere, we’re here for you. The home washer is a handy appliance designed for laundry washing, but it can also require repairs if it fails.


Maytag Washer Problems: Solutions & Repair FAQs

Maytag washer problem

My Maytag washer won’t start at all. What can I do?

There may be a few reasons why your Maytag washer won’t start. First, make sure it’s plugged in properly and that the power cord is in good condition. Also, check that the door is closed properly, as some modern washers only start when the door is locked. Finally, make sure your home’s circuit breaker or fuse hasn’t blown. If the problem persists, it may be an internal malfunction requiring professional intervention.

Why does my Maytag washer stop during a cycle?

A Maytag washer that shuts down mid-cycle can be caused by a variety of problems. Make sure that the drain hose is not clogged and that the water is drained properly. Also, check that the water pump filter is not clogged. Overload problems can also cause the machine to stop. Make sure you don’t overload the washer. If the problem persists, it may be due to a malfunction of the load sensor or programmer, which usually requires professional repair.

My Maytag washer makes a loud noise during spinning. What can I do?

Loud noises during spinning can be caused by several factors. First, make sure the washer is level, as a wrong level can lead to excessive vibration. Also check that the load of laundry is properly distributed inside the drum. Hard objects like coins or buttons can cause loud noises if they get stuck in the drum or pump. If the noise persists, it may indicate a worn bearing or a faulty belt that will need to be replaced.

Why is my Maytag washer leaking water?

A Maytag washer water leak is a common problem. First, make sure that the hot and cold water supply pipes are properly connected and do not have any leaks. Also check the gaskets around the door and detergent drawer. If you find any leaks, replace the defective gaskets. Sometimes, a leak can be caused by a clogged or damaged drain pipe. If in doubt, call a qualified technician.

My Maytag washer won’t drain properly. How do I fix this?

A Maytag washer that doesn’t drain properly may be due to a clog in the drain hose. Start by checking the drain hose for any objects obstructing the passage. Also, make sure the drain hose is not bent or crushed. The water pump filter may also be clogged, so be sure to clean it. If the problem persists, it may be a faulty water pump that will need to be replaced. If in doubt, consult a washer repair technician to diagnose and fix the problem.

The 5 risks concerning the maintenance of your oven

A well-equipped modern kitchen now includes an oven. The latter allows the realization of many recipes and must be the subject of special attention, especially in terms of maintenance. To preserve your oven for a long time and preserve it, here are some valuable tips.

#1 – Never clean your oven

The maintenance of your oven is a primary issue. And although this device sometimes serves on a daily basis, it is easy to forget to wash it. Whether your oven is self-cleaning or not, it will be important to think about washing it, for obvious reasons.

Over the course of use, food debris colonizes the inside of your device, and its accumulation can quickly involve various risks. It is a mistake to never think about cleaning the inside of your oven by relying on the fact that the fire sterilizes this place. Indeed, smoke and debris burned can be carcinogenic, or promote the development of various bacteria. A good cleaning will rid your device of all kinds of residue, while preserving it over time.

#2 – Misuse the functions of your oven

In order for your oven to serve you as long as possible, and to make the most of it, you need to know the functions it has. The use of the self-cleaning function, for example, prevents any use of the oven for a long time. So remember to do it long before the time scheduled for use when you have guests for example.

Some misunderstandings about the oven configuration can be counterproductive. This is the case, for example, when plugting the ventilation holes in the oven, in order to enjoy optimal heat. These mouths must remain open for good heat circulation inside.

There are also some habits that are easy to take, but that are not the most advantageous. For example, leaving aluminum dishes or papers in the oven after use is very common. The fact is that before preheating the oven for other cooking, it is easy to forget these various elements, which often causes unpleasant fumes or the risk of burns when one wants to remove these dishes.

#3 – Use your oven as a heater

This error is relatively common. It is indeed tempting to turn on the oven in cold weather to hope to warm the inside of your home in the absence of efficient heating. However, this solution carries significant risks, and it is strongly discouraged to use it.

It should be noted that over long periods of use, the risks of gas leakage are significant. Using the oven as heating increases this risk significantly. If the flame goes out without your knowledge, you may also incur carbon monoxide poisoning. This odorless gas is dangerous and can therefore escape without you noticing.

A third important point is the waste of energy related to this practice. The oven is not designed to offer the same performance as appliances dedicated to heating. You will therefore spend much more energy, without having the same results as for the case of a regulatory boiler.

#4 – Open the door too often to check cooking

Simple habits such as opening the oven door a little too often during its operation will also not allow you to enjoy the best of its performance for your recipes.

Heat loss caused by unnecessary openings leads to wasted energy, as the oven spends even more to return to the right temperature.

#5 – Using the wrong cleaning products

For the cleaning operation of your oven, the most important thing is to carefully select the products you will use. Your preference should be given to cleaning products designed with natural elements. You should know that despite the claims to the contrary of the brands, chemicals can be harmful and corrosive, which alters the structure of your device, and can represent a relative danger.

White vinegar or baking soda allow the formation of a very effective paste to remove food residues without harming your device.

Are you looking for good expertise for the maintenance or repair of machines in Montreal? For your repair in Quebec, for repairs in Montreal, RéparationAPlus offers you its expertise. The installation of rapid diagnoses, and the intervention of our teams are accessible at preferential rates.


Buying new or used appliances: the pros and cons

The choice between a new appliance and a used appliance is the daily dilemma of households. Decision-making is all the more difficult since these two types of household appliances each have many advantages. So what to choose between a second-hand or new appliance store? Discover in this article the advantages of these types of devices in order to make a choice at your convenience.

Benefits of Buying from a Used Appliance Store

Just like new appliances, the purchase of used appliances also has many advantages in terms of quality, price and warranties.

Affordable prices for installation

The advantage of opting for used appliances is the ability to afford an almost new item at a reduced price. It is also this aspect that makes it special, because it can happen that your washing machine or your iron lets you go without warning. Under these conditions, it is sometimes impossible to afford a new device given the condition of the wallet. It is also possible to negotiate prices before buying them. Something that is certainly not possible on the other side. In some cases, after negotiation you pay twice as much for the used device you want to buy.

Almost new for less

Contrary to popular belief, second-hand appliances do not always mean poor quality. With the appearance of new household appliances, households tend to replace their models, even if they are not old. As a result, used household appliances are relatively new. The quality and condition of the articles are in the majority of cases convincing. As a result, the devices can always last over time. In addition, some sales stores do industrial background repairs before putting the devices on the market. So you are guaranteed to buy a quality product at a good price.

Recycling: an eco-responsible choice

Generally, used appliances end up in landfill. These devices are often abandoned due to moving, but the truth is that they release gases and toxic substances as chemical and metal components decompose. The purchase of second-hand appliances is therefore a useful choice that falls within the framework of nature protection. In addition, you benefit from legal protection when you buy from a merchant. This gives you the ability to change the purchased device in case of durability or quality defects. In the absence of an amicable settlement, the merchant must in this case reimburse the purchase costs. The legal protection also covers the merchant for possible hidden defects.

Advantages of getting a new appliance

The purchase of a new appliance has multiple advantages. First, sales stores offer warranties that cover a given period of time for all your purchases of new appliances. You can therefore exchange or repair the appliance at any time in case of problems without making new expenses. Moreover, the sales stores offer appliances from the major brands known for their quality. Thus, you will have the chance to choose a reliable brand that designs quality products. The advantage of buying new appliances is the certainty of acquiring items that have never been used.

The devices are of high standard with a long service life. Therefore, you are not likely to buy appliances anytime soon. The truth is that the quality of household appliances does not impact their prices. The prices are indeed affordable and within the reach of all budgets. There’s nothing better than buying quality appliances at an affordable price. In addition to this, the purchase of new appliances entitles you to a home installation service. The after-sales service and residential installation is in most cases free and therefore accessible to all.

Used washing machine


New or used appliances for a residential installation: our conclusions

Between new and used appliances, the choice ultimately depends on the will of the buyer. It is up to you to conduct a thorough analysis and weigh the pros and cons before making a choice. Either way, appliances break down over time. This is the time to call on an appliance repair specialist to solve the problem as quickly as possible. Speaking of specialists, APlus Repair offers quality services in Montreal. You can visit its website to learn more.

The company brings together technicians capable of making repairs to household appliances of all kinds and brands. Thus, for a refrigerator, dryer or oven repair, APlus Repair deploys its skills for an impeccable repair. Moreover, appliance repair is not limited only to Montreal, but also extends to Quebec or Laval. Installations and repairs of devices are done at home after a diagnosis.


FAQ: Everything you need to know about buying from a used vs. new appliance store

Household appliances

Is it safe to buy used appliances?

When it comes to buying used appliances, safety is a major concern for many buyers. In general, buying used appliances can be safe, as long as you take a few important precautions. First of all, it is essential to exercise caution by checking the condition of the device before purchase. Inspect the device carefully, look for signs of excessive wear or damage, and ask the seller for details about the device’s usage history. By doing your due diligence, you can minimize risk and buy with confidence.

Are new appliances more energy efficient?

Typically, new appliances are designed with more advanced and energy-efficient technologies. This means that they are often more energy-efficient than older or used models. Advances in technology allow new appliances to operate more efficiently, which can result in savings on your electricity bill in the long run. However, it is essential to check the specific energy label of each appliance to get a clear idea of its energy efficiency.

What is the average lifespan of used appliances?

The average lifespan of used appliances can vary greatly depending on several factors. The age of the device, its previous maintenance and the quality of the brand’s manufacture are key elements that affect longevity. On average, well-maintained, good-quality household appliances can often work reliably for many years, even if they are second-hand. To get a more accurate estimate of the lifespan of a specific device, it is recommended to research the model and brand in question.

Can I negotiate the price of a used appliance?

Yes, negotiation is often possible when buying used appliances. Used device sellers are usually open to discussing the price, especially if the device shows signs of wear or if you buy multiple devices at the same time. However, it is important to negotiate in a fair and respectful manner. Do some research beforehand to get a realistic idea of the value of the device on the used market, which will help you negotiate a fair price for both parties.

How can I find quality used appliances?

To find quality used appliances, it is essential to follow a few important steps. First, conduct extensive research online to identify models and brands that are known for their durability. Then, inspect the device in person before purchase, checking its overall condition and looking for any issues. Feel free to ask the seller questions about the age of the device, its usage history, and maintenance. By being diligent in your buying process, you increase your chances of finding high-quality used appliances.

The most common breakdowns of your dishwasher

The dishwasher is a very important tool that helps you maintain your dishes without great effort. But, sometimes you may find yourself limited by certain breakdowns in its use. Discover in this article the most frequent breakdowns observed on a dishwasher.

First of all: properly maintain your dishwasher

The maintenance of your dishwasher is a habit to adopt to avoid repeated breakdowns. Start cleaning your machine starting with the drain. Indeed, during the repair of devices, it happens that professionals discover food deposits or shards of glass. All this contributes to the observation of various failures in the operation of your equipment. You have the option to remove the drawer located under the dishwasher to better detect waste and thus remove it.

In addition, you need to carry out a cleaning cycle with white vinegar. For this, make sure that the dishwasher is empty. Add the vinegar inside the machine and then start an empty cycle. Note that cleaning should be very intensive with the highest heat rate. This vinegar cleaning helps to remove traces of grease, mold and various other impurities.

Since it is used for washing, many people forget that the dishwasher also needs to be regularly pampered to extend its lifespan. Keep in mind that when waste clogs certain strategic points of the machine, it is a danger to its condition and to the quality of the wash. In addition, for your residential installation, it would be wise to deposit a slice of lemon after cleaning to fight against bad odors. Also take care of the outer surface of your device by cleaning it regularly with a sponge and soapy water.

The most frequent breakdowns

There are a multitude of breakdowns that occur frequently when using a dishwasher. Some as you will have noticed are settled with a good maintenance. On the other hand, others require machine repair.

A startup-related malfunction

Known as a very recurring outage, this can easily become frustrating for the user. This is the case of the dishwasher that does not work although it is turned on. There are a number of probable causes underlying this problem. However, this is usually due to a concern related to emptying. A repair of your machine will eliminate the problem. However, it would be wise to first check that you have made the correct setting.

Unsatisfactory washing

Sometimes your dishes come out of the machine with impurities. In this case, check that you have put on the cleaning products you need. If the problem is not at this level, make sure that the washing arms are not clogged. In addition, the concern could be at the level of the heating resistance. Also called, immersion heater, this is the element that allows the dishwasher water to rise to the temperature of the program you have selected. It must be said that there are different types of resistance. Thus, in the event of a problem, a commercial repair will not follow the same procedure as an industrial repair. So be sure to consult a specialist.

Drain pump failure

You can easily find yourself facing a problem with the drain pump of your dishwasher. This can be a buzzing sound during the emptying cycle or a lack of emptying. So opt for a repair of your installation to continue to benefit from the help of the device. It should be remembered that the drain pump plays an indispensable role in washing dishes. It allows an efficient evacuation of flows. It is very sensitive and is quickly prone to breakdowns when regular maintenance is not carried out.

A faulty door security lock

This concern is often observed after a long use of the dishwasher. It is necessary to open the door of your machine to be able to carry out the washing, which involves regular pressure on the handle. In addition, the majority of dishwasher handles are equipped with a safety lock that must be operated to keep the door closed during the washing cycle. Thus, being solicited quite often, she ends up giving in. If the handle is blocked, you can contact a professional for a repair. On the other hand, if it is broken or worn, it will have to be replaced and just proceed to a home installation.

Refusal to turn off

Many people often complain that their dishwasher refuses to turn off and no longer follows any of the instructions given. This failure usually occurs when the device goes into “safe leakage”. In this case, you then need to look for the origin of the leak, which can be very tedious. In addition, an important diagnosis may be necessary. It would then be better to entrust the dishwasher to a specialist in the field.


How do I fix a defective refrigerator?

The refrigerator is one of the essential household appliances in the current lifestyle. It is therefore complicated to do without it. However, when it breaks down, we are disoriented and it affects our daily lives, while there are several methods that allow us to repair this device without having to resort to a professional. By reading this article, you will discover the possible failures of a refrigerator as well as the checks to be carried out. We also offer you a small overview of the solutions available to know how to repair a fridge that no longer cools down.

How to Fix a Fridge That Doesn’t Cool Anymore: The Different Possible Breakdowns

You may be facing several breakdowns in your refrigerator. The latter are of several kinds.

The fridge does not work at all or no longer cools

Generally, a malfunction of this device is due to a poorly plugged in or in poor condition. For this, it is necessary to review the connection of the power supply. You can also make a home repair by replacing the plug. The possibility that a general breakdown may result from the fact that the refrigerator is dilapidated should not be excluded.

On the other hand, there are several reasons why your fridge is cooling down. It may be a disruption of the internal thermometer of the refrigerator. In this case, you had to think about replacing it. However, the concern may come from the circulation of gas that cools the fridge. The circuit can be clogged or drilled.

The fridge has an excess of freshness or disconnects your meter

It may happen that your cooling device gives off an increased freshness. After diagnosis, this problem very often comes from the inner thermometer. It will then be necessary to settle this one. Besides that, the concern may be due to a frost problem. In this case, the main sensor does not indicate the exact temperature and this leads the cold circuit to operate continuously, thus increasing the level of cold.

In addition, it should be remembered that at certain times, the refrigerator can disconnect. You can sometimes see on your electrical installation the effects of a short circuit. In some cases, it may be a defect in the grounding of electric currents. To remedy this, it is wise to ask a professional electrician for the repair of the breakdown.

Repairing a fridge that does not cool

To repair a refrigerator that is no longer cold, it is necessary to check several elements.

Check the air circulation inside the device

The refergirator cools by means of the air that circulates within it. It is therefore necessary a priori not to overload the shelves with food. In reality, a fridge that is too full in a residential installation causes poor air circulation. Therefore, this inevitably leads to a decrease in the device’s ability to cool properly.

Also, be sure to close the device carefully by checking if the food inside does not prevent it from closing. That said, you should never force the fridge to close. Also, avoid putting hot food in the fridge. The latter take quite a long time to cool.

Check the condition of your condenser

As soon as you notice the inefficiency of your fridge, you must also check the condition of the condenser. This component of your refrigerator is the element that allows it to cool quickly. Thus, if it is clogged or full of dust and debris, it is obvious that the normal operation of your appliance is hindered.

The solution is quite simple. It is often necessary to check the condition of the condenser. You can also clean it if you feel it is necessary. Also consider sucking up the dust that often ends up behind the fridge. This will promote improved air circulation. Also, when you notice a loss or leak of refrigerant, the best is to call a professional specialized in the repair of appliances and Repair machines.

Some other solutions at your fingertips

It may happen that you are facing other glitches than those mentioned above. Your refrigerator can sometimes emit noise. In reality, after a diagnosis, if you find that the fridge is making noise, in addition to being annoying, it is a sign of a delicate problem. In this situation, it is necessary to check the stability of the refrigerator. If the latter is wobbly, you will notice vibrations every time the engine stops. To do this, you can take advantage of the device’s warranty to carry out its commercial repair.

In addition, it may happen that the device freezes your food while it is a refrigerator and not a freezer. Indeed, if the inside of some refrigerators sometimes frosts, it is necessary to look for and diagnose other problems. For this, it is first necessary to check the hole in the drain. It is located at the bottom of the device. If it is an unventilated cold appliance, check above the vegetable tray. It is possible to make a diagnosis at the thermostat and lower it slightly. If you are unable to make an industrial repair, call on a technician in the field.

Ultimately, when you find that your refrigerator is facing a particular concern, do not panic. You can apply these measures developed above at first glance. However, if you encounter difficulties, you can seek the help of a professional.


Refrigerator Repair FAQs: Costs, Maintenance and Useful Tips

fridge that doesn't work anymore

How much does it usually cost to repair a refrigerator?

Pricing for refrigerator repairs can vary greatly depending on the nature and severity of the problem. For minor issues such as replacing a thermostat or repairing a minor part, you can expect to spend between $50 and $200. However, for more complex repairs involving major components like the compressor, costs can easily exceed 500 euros. It’s important to note that rates can also vary depending on the region and service provider. To get an accurate quote, it is recommended that you contact an appliance repair professional.

Can I clean the condenser myself?

Yes, it is entirely possible to clean your refrigerator condenser on your own. The condenser is usually located at the back of the unit. Before you begin, be sure to unplug the refrigerator for safety reasons. Then, use a vacuum cleaner to remove the dust and dirt that has accumulated on the condenser. This can help improve the efficiency of the refrigerator by allowing for better heat dissipation. However, if you are not comfortable with this task or if the condenser is difficult to access, it is recommended that you hire a professional to perform the cleaning.

My fridge makes an unusual noise. What should I do?

If your refrigerator is making unusual noises such as rattling, squeaking, or buzzing, it may indicate an underlying problem. One of the common reasons for these noises is a faulty compressor. In this case, it is best not to ignore the problem, as it can lead to serious refrigerator malfunctions. We strongly recommend that you contact a qualified professional to diagnose and resolve the issue. Ignoring unusual noises can ultimately lead to more expensive repairs.

How often should I check the refrigerator door seal?

It’s important to check the condition of your refrigerator’s door seal regularly, ideally every six months. A damaged or worn door seal can allow hot air to enter the inside of the refrigerator, leading to increased energy consumption and reduced cooling efficiency. To check the joint, make sure it is secure and there are no cracks or tears. If you notice any issues, consider replacing it promptly to maintain optimal performance of your refrigerator.

When should I consider replacing my refrigerator instead of repairing it?

The decision to repair or replace a refrigerator depends on several factors, including the age of the appliance, the frequency of breakdowns, and the estimated cost of repairs. If your refrigerator is relatively new and the repairs are minor, it may be a good idea to have it repaired to extend its life. However, if your refrigerator is old, repairs are frequent, and the cost adds up, it may be more economical in the long run to replace it with a new, more energy-efficient model. A repair professional can help you make the smartest decision by assessing the condition of your refrigerator and the potential costs of repair.


Why you need a professional for appliance repairs

Save time:Although it is said that it costs less to repair your appliance, sometimes it is a temporary solution. Hired an expert saves you a lot of time. You won’t have to go back and forth and spend money unnecessarily on other repairs. You prefer to have a more productive activity and spend your energy on other more important occupations.

Save money: A self-trained technician may charge you much less, however, there is a high probability that the service or repairs performed will not be sustainable. You may need to contact someone else for this work. A professional specializes in his field and, most of the time, knows exactly how to repair or install your appliances or machines.

A job well done: 99% of the time, you can expect a job well done. Specialists have spent many hours studying and developing the skills they need to help clients. They apply their knowledge and expertise and you’ll get your money’s worth. A professional has the skills and knowledge to do the job.

They are well informed: They know what they do! Put them to the test and you won’t be disappointed. You’ll get back in touch with them again! Not only did they learn to repair, but they also learned to have good customer relations. Experts have a better understanding of the structure and composition of the devices, so they know exactly how to carry out repairs and installations.

Build your network of relationships for the future: Whether you’re an industrial, commercial or residential customer, this is great news for you. If you develop a professional relationship with your clients this can help you, in the future, to realize other projects. They’ll run after you!

They are regularly updated: DIY is a thing of the past! Professionals are aware of new developments and are constantly learning new ways to hone their skills to better meet the needs of their clients. They master the new tools and machines used to help your devices.

You don’t have to buy tools Tinkering can be very expensive. What for? Imagine having to spend money to buy a particular tool to repair a device. It’s expensive and painful. With a professional, you don’t need to get tired, they do all the work. Their work equipment is specially designed to help your appliances in good working conditions.

Special offers Do you like to do good business? Another good reason to call in a professional technician. If the warranty has expired, convenience stores can help. Whether it’s for a small problem or a bigger problem, they know what it takes to make your devices functional again.

They are qualified: Professionals are well trained and have a high level of training.

Trusting well-trained professionals can be very advantageous because it’s great value for moneyChez A-we work well, all the time, every time.

How to clean your oven the right way, with the right product without causing damage

“I clean my oven regularly, so it should do the trick.” This is often the view of many users of household appliances. We hear many times that cleaning things makes them last longer. Although this is a fact-based assertion, there are conditions. It is sometimes difficult to admit that some cleaning products, giving your stove a clean and shiny look, can be harmful to your oven.

If you are thinking of buying a new stove, or if you already have one, then this item will be very useful, especially if you like to live in a healthy environment. There are various cleaning methods: manual cleaning, steam cleaning and automatic cleaning. These three methods can be used to carefully clean your oven. However, automatic cleaning of your oven can produce pollutants that are toxic to human health. Some chemicals used can break the glass of your oven and prevent the door from opening.

In short, the objective of this article is to inform you about some economical ways to clean your oven without damaging it, and also to repair your appliances. Let’s be positive and take the next step! Ready? Let’s go!

Boiling water: We usually have so much water at our disposal that it is inconceivable to have a dirty oven. You just need to boil water in an electric kettle and pour it carefully inside your oven. Leave to rest for about 10 to 15 minutes. This softens deposits or food that remains glued to your oven. Grab a cloth, clean the surface and watch your oven transform before your eyes!

Vinegar: “Wow!” This natural miracle product is amazing. It does have many advantages. From the skin, to the hair to your appliances, it is the perfect cleaning agent. How does it work? Bring a bottle with spray and add a little vinegar with water. Spray your oven and let stand for an hour. It removes dirt or stubborn stains that are difficult to remove.

Ammonia: The smell of this product is not very pleasant, but it is the ardent defender of your ovens as it removes stubborn stains. Ammonia makes your life a lot easier. You can soak the oven racks in a frying pan all night and notice the next day the stubborn stains disappear.

Baking soda: If the walls of your oven need a thorough cleaning, try baking soda. It will rid you of dirt in a flash. Apply a small amount of vinegar or lemon juice with baking soda and rub the sides of your oven with a cloth. You can also combine baking soda with salt.

Hydrogen peroxide: It’s working! This product is very powerful. It works in the same way as for teeth whitening. It removes stains very quickly. All you have to do is clean your oven with soap and water, then add hydrogen peroxide. You can say “goodbye” to the encrusted stains!

Vegetable oil: This may be the last cleaning product you’d have thought of. Well, it has other functions other than those of the kitchen. It cleans your oven and gives it a refined look. Divide a little vegetable oil into your oven and let stand for 10 minutes. Then clean with baking soda, soap and water.

Now that A’s provided you with some simple and economical ways to clean your oven, you’re now able to keep your oven clean so it looks new! Our customers are our priority.


Guide complet pour un nettoyage de four sans danger et efficace : FAQ sur les produits de nettoyage et les astuces

Oven Problem

Quels sont les dangers de ne pas nettoyer correctement son four?

Not cleaning your oven properly can have significant consequences. Burnt food residues can not only produce smoke and unpleasant odors, but they can also contaminate your cooked meals, altering their flavor. Even worse, this burnt residue can become a potential source of fire if you use your oven again at high temperatures. In addition, grease buildup inside your oven can not only affect its performance by reducing its energy efficiency, but it can also damage the heating elements, requiring costly repairs.

Quels sont les produits de nettoyage recommandés pour un four?

For effective cleaning of your oven, it is recommended to use products specially designed for this task. Commercially available oven cleaners are formulated to remove cooked fats, burnt food residue, and stubborn stains. Be sure to carefully follow the instructions on the product label, including soaking times and precautions for use. If you prefer a more natural approach, baking soda mixed with water to create a paste can be an effective solution. This dough can be spread on the inside surfaces of your oven and left in place to dislodge any residue. After resting, rub gently to remove dirt.

Comment nettoyer les grilles et les tiroirs du four?

To clean your oven’s racks and drawers, it is recommended that you first remove them from the inside of the oven. Soak them in warm, soapy water for a while to loosen grease and food residue. Then, use a scrub brush or sponge to scrub the grates and drawers, making sure to remove any embedded dirt. If the residue is particularly stubborn, dishwashing detergent or oven cleaner can be used, but be sure to rinse it well afterwards to remove any chemical residue. Finally, dry them thoroughly before putting them back on.

À quelle fréquence devrais-je nettoyer mon four?

How often you clean your oven will largely depend on how often you use it and the type of cooking you do. In general, it’s recommended that you thoroughly clean your oven about every three months if you use it frequently. However, if you regularly cook messy or deal with frequent spills, it may be necessary to clean up more frequently. Regular maintenance between these more thorough cleanings, such as removing crumbs and residue after each use, is also advisable to maintain a clean oven.

Comment puis-je éviter d’endommager mon four en nettoyant?

To avoid damaging your oven during cleaning, it is essential to follow a few precautions. First, always follow the manufacturer’s instructions for recommended cleaning products, as using inappropriate products can damage your oven surfaces. Avoid using hard, abrasive objects, such as knives or metal scrapers, to scrape away dirt, as this can cause scratches and permanent damage. If your oven has a self-cleaning coating, make sure you don’t damage this coating, as it plays a key role in how easy it is to clean. Finally, make sure your oven is completely cooled before you start cleaning to avoid any risk of burns.

Why you need a professional for Appliance Repairs

Do it yourself! We will not dispute this statement. If you are trained in that area of expertise then not a problem. However, sadly, most persons who practice DIY fixing cause additional damages. It is essential that you hire a professional to do your appliance repairs for many reasons than one. We have lined up for you 10 reasons why you need a professional to repair your appliances. Now, let’s dive into it.

Saves Time

While fixing your appliances by yourself is said to be more cost-effective, you may want to consider a temporary fix. Hiring an expert saves you a lot of time. You will not have the hassle of moving back and forth and spending unnecessary money for redoing repairs. You want to be as productive and direct your energies to other important matters.

Saves Money:

A self-trained technician may charge you a whole lot less, however, there is a high possibility that the services or repairs done will not be long lasting. You may have to rehire someone else for the job. A professional is versed in the area and most times knows exactly how to repair or install your appliances or machines.

A job well done:

99% of the time you can expect great work. Experts have spent tireless hours studying and learning the skills they need to assist clients. They will apply their knowledge and expertise and give you value for your money. A professional posses the skills and knowledge to get the job done.

They are knowledgeable:

Oh yes! They know their stuff! Put them to the test and you will not be disappointed. They will keep you coming back. Not only were they taught to perform repairs but also, they were taught to have good customer service skills. Experts have a deeper understanding of the structure and makeup of appliances, so, they know exactly how to perform repairs and installations.

Build future connections:

Whether you are an industrial, commercial or residential client, this is great news for you. If you develop a professional relationship with your clients this can help you in the future with other projects. They will have your back!

They are current: DIY is so last year!

Professionals are abreast with new inventions and are constantly learning new ways to perfect their skills and serve clients better. They are very aware of new tools and machinery that will be used to fix your appliances.

Save you the trouble of buying tools

DIY methods can be costly. Why? Can you imagine spending money to buy a particular tool to perform an appliance repair? This is costly and strenuous. With a professional, you need not get weary, they do all the work. Their work equipment is specially designed to meet your repair needs and keep your appliances functioning and in good work conditions.

Get Deals

Are you a lover of deals? There you go, another reason to hire a professional technician. In a situation in which you have expired warranty, repair technicians can help. Whether it be a large or small issue they are normally aware of the things to do to make your appliances functional once more.

They are qualified:

They are well-trained professionals that have a high level of training.
Professional Advice: A well rounded professional will not keep all the good stuff to him! It would be selfish if they did. An expert will give you additional information to keep your machines and appliances in good shape. Let’s call this a little bonus.

Trusting well-trained professionals can be very advantageous as you are bound to get value for money.
At A+ we do the jobs right, all the time, every time.

How to clean your stove the right way, with the right product without causing damage

“I am cleaning my stove so this should do.” This is a thought of many appliance users. We have always heard that cleaning things around us makes it last longer. Indeed, that is a factual statement, however, there are terms to this. It may be very shocking to you that certain cleaning agents that give your stove a sparkly clean may be bad for maintaining the appearance of your stove.

If you are considering to buy a new stove, or you have a functional one, then this post will be very useful for you, especially if you are keen about promoting a healthy environment. There are various methods of cleaning which include manual cleaning, steam cleaning and auto cleaning. All these three methods can be used to thoroughly clean your stove. However, autocleaning your stove can produce pollutants that are toxic to human health. Some chemicals used may cause the glass of your stove to shatter and prevents the door of your stove from opening.

Anyways, the focus of this article is to educate you about some economic ways of cleaning your stove without destroying it. So, let us not get too carried away with the negatives. Let’s shift gear a bit.
Are you ready? Let’s go.

Boiling water: We have so much water in our space, so there is no excuse for a dirty stove. All you need is to boil some water in an electric kettle and carefully pour it on the surface of your stove without touching the burners. Let it stay for about 10 to 15 minutes. This will help to soften sediments or food that sticks to your stove. Get a cloth and wipe off the surface and watch your stove transform before your very eyes!

Vinegar: Wow! Wow! Wow! This wonderful natural product is incredible. It is filled with a surplus of benefits. From skin, to hair to your machines and appliances it is the perfect cleaning agent. Here is how it works. You can get a spray bottle and add some vinegar with some water and spray it on your stove and let it remain for an hour. It will remove the dirt or stains that are difficult to remove.

Ammonia: It is not the best smelling product but it is the tackler of those dirty looking burners that are often stubborn when it comes to stain removal. Ammonia makes life a whole lot easier. You can put the burners into a zip lock bag overnight and watch stubborn dirt disappear.

Baking soda: If the surfaces of your stove are longing for a thorough clean then try baking soda. It can get rid of your dirt in a flash. Apply a small amount of vinegar or lime juice with baking soda and scour the surface of your stove using a rag. You can also combine the baking soda with salt.

Hydrogen peroxide: It works! This substance is packed with power. It works in a similar way like on the teeth. It removes stains very fast. All you need is to clean your stove with soap and water then add the hydrogen peroxide. Then you can say bye to those crusty stains.

Vegetable oil: This may have been the last stove cleaning product on your mind. Well, it has other functions other than cooking. It helps to clean your stove and give it a refined look. Add a little vegetable oil to your stove and let it stay for 10 minutes. Then clean with baking soda and soap and water.

Now that A+ has provided you with some easy and economical ways of cleaning your stove, you are now well able to keep it looking clean and as good as new. A+ where our clients are priority.