Montreal,Laval
West Island
Lun-Ven / Mon-Fri 8:30am–7:00pm
Sam-Dim / Sat-Sun: 10:00am–5:00pm

Contribution Porch.com on kitchen appliances

À l’ère moderne, les appareils de cuisine sont devenus indispensables dans notre vie quotidienne, révolutionnant la façon dont nous cuisinons, préparons les repas et conservons les aliments. Du simple grille-pain aux appareils multifonctionnels avancés, ces outils sont devenus essentiels pour gagner du temps, simplifier les tâches et améliorer notre expérience culinaire globale. Cependant, avec la dépendance croissante à l’égard de ces appareils, il est crucial de reconnaître l’importance de les entretenir pour assurer leur longévité. Dans cet article, des experts nous donneront les meilleurs conseils pour maximiser leur durée de vie.

(more…)

What you probably do that shortens the life of your appliances

Appliances are a significant investment and we all want to do everything we can to make sure we get the most out of them before we need to repair or replace appliances. However, taking care of your appliances involves much more than keeping them clean, there are small things that most of us are guilty of doing (or not doing) that could significantly reduce the lifespan of our large appliances – which could result in large appliances. repair in Vancouver.

Overfilling your washer

It can be tempting to throw away that extra pair of sweatshirts to avoid having to do an extra load of laundry; after all, isn’t it better to run the washer as few times as possible? Not exactly. Excessive jamming of your machine can lead to faster wear of key components, not to mention that the quality of the cleaning may require you to restart the load anyway. If you end up with a very large load of laundry, you’d better separate it into two small loads rather than trying to store everything at once.

Using too much detergent

More isn’t always better, especially when it comes to the amount of detergent you use in your washer. A surprisingly common appliance repair in Vancouver is for damage caused by excessive detergent use. When too much laundry soap is used, some of the foam can pull up the hose, which could impact the switch. Excess soap also leads to a buildup of residue, which can lead to drainage problems, too wet clothing, a foul odor in the machine, and increased wear and tear on the machine itself. As a general rule, never use more than the recommended amount of detergent; for difficult stains, use a stain remover combined with an additional soaking cycle.

Too much clutter in your dishwasher

Filling your dishwasher shouldn’t be a personal challenge to see how many extra plates or bowls you can insert before running a cycle. Not only are you more likely to end up with dishes that still contain pieces of food or residue, but you’re also at risk of burning your device prematurely or creating problems that can lead to leaks. Dishwashers are configured to allow optimal movement of soap and water between dishes. If the dishes don’t all fit into this space, you may just need to run a second cycle.

Don’t spray your appliances

Keeping your devices clean is essential to keep them in good working order. However, one thing most of use are done badly sprays the cleaning solution directly on the device and then wipe with a cloth. This can have disastrous effects on electrical components, especially on stoves, dishwashers and microwaves. Instead of spraying directly on the device, moisten a cloth and then wipe.

Washing machine maintenance tips that might surprise you

You may already know how to maintain your washing machine to some extent. You make sure the device is level, you don’t overload it, etc. Today we focus on washing machine maintenance tips that many owners do not know about.

Here are our main guidelines:

  1. Use the recommended type and amount of detergent.
  2. Inspect the washer pipes every month and replace them every three to five years.
  3. See if you need a drain vent.
  4. Make sure the door seal remains dry between loads.
  5. Leave the door open for air circulation when the machine is turned off.
  6. Clean your washing machine often to limit mold spores.
  7. Clean the lint filter. (Yes, the washing machine has one!)

Learn more about these steps below, but remember that your washing machine is not immortal, no matter how much you take care of it. If you need an appliance repair, Climabionet will be happy to help you. Just call our nearest team of appliance experts or make an appointment online.

How to maintain your washing machine with confidence

When it comes to maintaining a washing machine, knowing what to do is only half the battle. Knowing how to do it correctly will help you avoid the need for excessive repairs or premature replacement of the device.

1. Use the recommended detergent.

Check the type of laundry detergent recommended by the manufacturer, the amount of detergent and the instructions for use. For example, a powder detergent or a high-efficiency (HE) liquid detergent should be used with some water-saving washing machine models to minimize the formation of residues. Also, be sure to properly charge the detergent – some units have a detergent tray and a softener tray, while others do not.

2. Keep an eye on the washer pipes.

Your washing machine is equipped with a hot water hose, a cold water hose and a drain hose. Check these pipes monthly for cracks or fragility. The best time is right after running the washing machine, as you will be able to see if something is leaking. Do you see a leak? Plan a professional repair of the washing machine .

Even if the pipes of your washing machine seem in good condition, it is still recommended to replace them every three to five years to avoid accidents.

3. See if you need a drain vent.

A drain vent is installed on the drain pipe of a washer to prevent pressure from impeding drainage. Some local building codes require this vent. Look at the drain hose of your washer to see if there is a space around it where it enters your drain. If there’s a small space, you probably don’t need a drain vent, unless local building codes require it. If the hose fits snugly, get a drain vent if you don’t already have one. Otherwise, you might need a water damage restoration service…

4. Make sure the door seal remains dry.

The seal, or rubber seal, around the door of your washing machine is susceptible to mold and deterioration. Wipe it after doing a load of laundry, as keeping the seal dry will protect it from premature wear.

5. Open the door for air circulation.

The washing machine can be a fertile ground for mold. If you leave the door open when the machine is not in use, you reduce the risk of spore multiplication.

6. Clean your washing machine often.

Speaking of mold, when was the last time you cleaned your washer? Front-loading washers are particularly known for getting dirty, and all washers must be cleaned every month or every two months. We have a list of tips to properly clean your washing machine.

7. Clean your washer’s fluff filter.

Many owners do not know that most washing machines have lint traps. If you notice a lot of down on your clothes, it may be due to a clogged lint trap.

Why does my dryer no longer dry?

Your washing machine has stopped working for some time. It even lights up sometimes, but can no longer dry your clothes at all. Despite your various attempts at self-repair, the situation has not changed. Don’t sweat it. Even without the help of a specialist, you can get a small idea of the causes of the malfunction. Except that after the detection of the cause, you should contact one of the experts in repair of household appliances based in Montreal as Repair Aplus.

Key parts of your dryer would be defective

Whatever model you have, know that dryers are designed in a somewhat delicate way. The obsolescence or defect of a single room can quickly lead to long-term inconveniences. When, for example, parts such as the electronic board,the landing, the thermostat or the resistor are defective,your machine will no longer be able to dry your clothes.

The electronic card

This is undoubtedly one of the fundamental parts of washing machine machines. It plays almost the same role as the engine. It is she who takes care of the management of all the functions of the device. When it becomes obsolete or defective, it automatically affects other parts. These include:

  • The engine;
  • Heating;
  • Water…

The landing of your dryer

It is this component that protects the rear drum to allow your device to detect moisture. If it malfunctions, the malfunction of the landing of your washing machine will be obvious. When it is dilapidated or worn out, it can easily delight your machine with its dryer nature. Indeed, when the bearing remains for months without being maintained, it ends up accumulating fatty waste. It thus directly loses its ability to detect humility.

Resistance deteriorates

Without resistance, no air heating and without air heating, your linens will not dry. Resistance is therefore also a very important element of the dryer. Often two in number, it can easily cause your machine to stop heating. When only one of the two is dilapidated or deteriorated,your entire device fails. Either he simply stops drying the clothes, or he starts by putting a long time to dry them. You can find out if it is still functional by means of a multimeter.

The thermostat

Many of the heating stops of the washing machines are also due to a malfunction of the thermostat. It is this important building block that controls or signals the temperature to the programmer. But, after several moments of use, this part may lose its effectiveness. So, if the electrical board of your dryer does not have a problem and if its resistance is still functional, check the condition of the thermostat. It could be that it is the very source of your troubles.

Electrical installation

All electrical installations end up losing their performance over time. This is also the case with the electrical outlets to which the dryers are connected. After a few years of use, they can deteriorate and thus prevent your device from working. So also check the condition of your electrical installation.

Other elements of your dryer would be clogged

You almost never realize it. The refusal to dry washing machines is also often due to the plugging of certain elements that are supposed to let air through or water. This is for example the drain pump,the condenser,the filter

The drain pump

The drain pump is one of the parts of the dryer that should never be clogged or plugged. It is it that serves as a drain channel for condensation water. As soon as it locks up, the water is no longer discharged and the operation of the device is severely disrupted. Then examine the drain pump, it may be the cause of your troubles.

The condenser

The capping of the condenser is very paradoxical to the normal activity of the dryer. Even if you tolerate everything, never accept that the condenser is clogged, if your device has one. This causes the systematic shutdown of theheating effect of your machine. To avoid this clogged problem, it is just advisable to clean it at least once or twice every month.

The filter

It is also one of the building blocks of the washer-dryer to watch closely. By dint of accumulating textile residues, it ends up clogging and thus makes drying complicated. Because all dryers are equipped with a safety mode that makes them dysfunctional when the filter is clogged. So also check the status of your filter to be able to unclogging if necessary. And you don’t need to bother yourself if you don’t know about it. Just use ourservices. We are one of the best experts in Montreal in repairing or replacing parts of household appliances. We can intervene in your home as well as in your workplace.

The belt of your dryer would be broken

If none of the previously listed parts show any signs of malfunction, then check thecondition of the belt of your machine. This is the instrument that promotes the rotation of the dryer. When it breaks, it directly causes the work of washing machines to be delayed or even blocked. In case you realize this, just call on one of ourprofessionals. They are prepared and very seasoned for these kinds of work.

In short, visit our website to learn more.

Are dryer leaves bad for you or your dryer?

While it is true that some dryer leaves can be “bad” for your dryer by creating residues, most of them are no worse than your detergent. But are drying sheets bad for you? It is possible that some types are.

All manufacturers of dryer sheets must comply with certain safety guidelines and all chemicals used in dryer sheets must be approved by the FDA. However, since drying sheets are not applied directly to your body, manufacturers do not have to disclose the ingredients on the package. Some of these ingredients, especially perfumes, can irritate people’s skin after putting on washed clothes. This reaction may differ from person to person.

Let’s dive into the debate about dryer leaves, your health and the longevity of your dryer.

Are tumble dryer sheets bad for you?

Although the chemicals in dryer leaves are generally recognized as safe, more research is needed to determine the potential health effects of scented laundry products.

In a study of five sheets of branded dryers, researchers found that the leaves emitted 15 endocrine disrupting compounds associated with asthma. Even though the toxicity of dryer leaves is still disputed, if you have sensitive skin, asthma or migraines, it may be interesting to find and use an alternative to dryer leaves . You might also be interested in our comparison of drying sheets versus softener.

What are dryer leaves made of?

Drying sheets are made from polyester fibers coated with a softening agent, such as fatty or steagic acids. Most types also contain artificial or natural fragrances.

These ingredients make drying sheets useful for fabric softening and other unique uses. We have a large list of uncommon uses for dryer leaves!

Are dryer leaves bad for your dryer?

There is a debate about whether dryer leaves are good or bad for your dryer. The answer lies somewhere in the middle of the extremes. The heat of the dryer can melt the acids that cover the leaves of the dryer, covering your dryer with a sticky coating. Some detergents can cause the same thing.

Although you may not notice this coating right away, it can accumulate on the dryer’s lint filter over time. If the filter is clogged, your dryer may not dry clothes properly, turn off halfway or work without heating. To avoid this, keep the filter properly maintained and regularly clean the residues on the other parts of the dryer.

As a rule, dryer leaves are no worse for your dryer than detergent. If you practice good maintenance and cleaning of the dryer, you can continue to use drying sheets in your dryer.

How long do the Refragirrs last?

Refrigerators typically last from 10 to 18 years and the average life of a refrigerator is 14 years. Many factors influence the life of the refrigerator, including the type of refrigerator and environmental factors.

The
New York Post published
an article about an 85-year-old refrigerator that still works, but it’s rare for a refrigerator to last more than two decades. However, you can take control of the maintenance of the refrigerator to make sure yours stays fresh for a long time.

We have maintenance tips below, as well as important details about the life of the refrigerator.

First of all: never postpone the repair of a device. At the first sign of a problem, plan the service with reliable experts like those from APLUSRepair. You can even schedule online at any time that suits you.

How long should a refrigerator last in your home?

Although a refrigerator lasts an average of 14 years, many variables can change the answer to “How long do refrigerators last?” For example:

  • Type and quality of refrigerator. Compact refrigerators tend to last fewer years than large domestic refrigerators. In addition, high-end models usually last longer than units without high-end parts.
  • The rigor of the interview. Periodic maintenance can help your refrigerator last longer than the one that was overlooked. Below we offer you some maintenance tips!
  • Quality of repairs. Some appliance repair technicians do not use quality OEM parts, or they can perform a “quick repair” that does not last. The simplest solution?
  • Usage factors. A refrigerator will not last long if it is misused. Make sure that items do not block vents and avoid overfilling or underfilling. If you run out of food, put a large jug of water in the refrigerator so that it does not work too hard.
  • Environmental factors. If you have a refrigerator in the garage or right next to a sunny window, it is more likely to wear out faster. Avoid exposing the device to very hot, cold or humid conditions.

If you have personally purchased the device you are using, you can more easily predict how long the refrigerator will last as you know its full history. If you’ve just moved into a new place, you may know the age of the refrigerator, but you don’t know if it has been maintained or abused. In this case, it is better to simply take care of the device and call a professional for the repair of the refrigerator in case of need.

Ways to maximize the life of your refrigerator

If you want your refrigerator to last a long time, make sure you know how to care for it. First, be sure to clean up spills immediately in the refrigerator and thoroughly clean your device about twice a year or as needed. Do not fill the refrigerator too much or too little, as both actions lead to overloading of the device. To learn how to clean the condenser fan and perform other technical maintenance, check out our refrigerator maintenance tips.

5 Tips for Selecting an Appliance Repair Company

In order to gain your trust and develop a true customer relationship, some appliance repair companies are committed to offering you more than an efficient service! Here are 5 tips to help you choose a good, competent repair company that listens to your needs:

 

1 – Reliable and fast customer service

Have you ever had to confront a technician who did not show up at your home in a timely manner? Does the2nd or3rd visit seem to have been planned more slowly than your first call? Has the after-sales service call also been programmed quickly and efficiently?

 

As you know, maintaining the quality of service is paramount for a company. Whether it’s your first call, your second call or an after-sales service call, you have the right to be served with the same attention!

 

2- The company’s experience

It will be imperative to you, when you approach, to take into account the experience of the company. Not necessarily the number of years in business, but continuing education. A company with 30 years of experience might not be ready to repair your new device because the devices are manufactured differently today than they were then. Learn about continuing education when researching a repair company to make sure it is up to date with the latest technology and is receiving appropriate training. Rest assured that repair professionals at Repair Aplus know all the details about modern appliances and older appliances.

 

3- Polite and courteous employees

Have you ever felt like you’re getting interrupted when you call a company? Are the staff jovial, do they really want to help you and accommodate you by sending a technician home quickly? Are you actually informed of the progress of each step of the process? Do employees really want to help you solve your problem?

 

A responsible company will make a good impression on you from the first approach, but also, and above all, throughout its discussions with you at every stage of the process.

 

4- Licenses

Make sure the company you want to hire is licensed, secured and insured. If they are not, they could damage your appliance or worse, your home. You’ll be stuck covering a higher bill than it should be! Most device repair companies have their license numbers readily available on demand, so if you want to check and make sure, be sure to ask about it!

 

 

5- A good reputation

Has the company been in existence for several years? Is it recommended by a trusted organization such as the CAA? Manufacturers? Satisfied customers? Does the company have online ratings? Are the ratings positive or negative? How does the company respond to negative tests to correct the situation?

 

The fact that a company has a solid reputation and has been in existence for several years is also a sign of the importance it places on customer satisfaction.

5 handy tips for the microwave

When it comes to fast-cooking or reheating food, it’s hard not to think about the microwave. The microwave is one of the most occurring household appliances in Canada. Starting from our daily lives, you need to know the basics of this machine.

Indeed, when your machine has a little problem, the first reflex may be to throw it away. And yet, that’s not what you have to think about! There are small glitches on your device that can be solved easily. So how do you deal with this appliance for your greatest happiness?

Here are five handy tips for the microwave.

Gently clean your microwave

It’s not just the dishes that need to be washed. You should also think about washing if not cleaning your microwave. Like any household appliance, a lack of cleaning can cause damage. In addition, your health is not immune to nuisance. Food cooked or warmed with a dirty microwave can welcome bacteria with open arms. These microorganisms can turn your meal into a source of disease. It is best to avoid such damage by regularly cleaning your microwave oven.

With each use, put a damp cloth inside the appliance to clean it. Cleaning removes food debris that has embedded in the corners and edges of the machine during cooking. It is advisable to refresh the interior of the appliance by heating a cup of water containing lemon slices for a few minutes.

Thaw frozen foods before cooking

Sometimes you may be tempted to cook the meat out of the freezer in one action. That is, “make a stone, for two strokes” by thawing the meat during cooking. Unfortunately, this is a practice to avoid absolutely. Indeed, thawing is one thing, cooking is another.

thawing

For the thawing of your food, opt for plastic bags made exclusively for this process in a microwave. Make sure you have completely thawed your food. Thawed food should no longer return to the freezer.

After thawing, go straight to cooking without further delay.

cooking

Once your food is completely thawed, you can cook. To do this, follow to the letter the cooking instructions of your recipe. You know you don’t have to leather everything in the microwave. For example, you should avoid cooking a turkey in your appliance in its entirety.

On the other hand, strictly respect the internal temperature of food, as households in Quebec do so well to prevent them from being a threat to your health.

Respect the natural capacity of your microwave

You have a lot to cook or reheat, but you don’t have much time. It’s only natural that the idea of putting everything in the microwave comes to mind. But don’t give in to this temptation!

Here, the ADMIRAL stove has a given capacity that should not be overexploited. The same is true of the DANBY oven. On the guide to the use of these appliances,clear and simple instructions are provided to facilitate their proper use. Also, please use small containers for your machine. This allows for better optimization of the device.

Also, be patient, keep calm in front of your appliance. If you have several foods to reheat or cook, go one by one.

The danger of not respecting the natural ability of the machine is that you decrease its lifespan.

Doing some troubleshooting yourself

Generally, the problems you may face while using your microwave are electronic. Sometimes the device’s problem can be related to a capacitor and it cannot start. You can unplug the device for about 30 minutes and then reconnect it. If the problem persists, you will need outside help.

Also, when the touchpad keys are struggling to work, you can do a little maintenance by you. Using a hairdryer,heat the touchpad that no longer works. With a little luck, you will regain control of the buttons of your appliance.

Assiduously reading your microwave’s usage guide could help you overcome some of the difficulties with how it works.

Call on professionals for repairs

Sometimes by mishandling or for various reasons, your microwave has broken down in general. You tried to do a home troubleshooting without success. Don’t panic! It’s probably not time to put it in the closet to buy a new one.

It is true that changing the parts of the machine is not easy. This can cost you the price of a new device. However, to avoid certain expenses and especially in the name of protecting the environment, it must always be tried to repair it. There are professionalslike Repair APlusfor this purpose. No brand of microwaves outperforms them. Besides, they are very comfortable with the best brands like:

  • West Land;
  • Ge;
  • Maytag;
  • Neptune;

Moreover, don’t hesitate to contact this company that is based in Montreal when you feel the need.