Montreal,Laval
West Island
Lun-Ven / Mon-Fri 8:30am–7:00pm
Sam-Dim / Sat-Sun: 10:00am–5:00pm

Why is my refrigerator making noise?

The refrigerator is a household appliance that helps enormously in the kitchen. It makes it possible to preserve food by guaranteeing it a longer duration. However, it can emit several normal noises or not. It can also be affected by many failures depending on the malfunction it has suffered. When the noises become incessant, it truly becomes an ordeal. The only alternative is to find a refrigerator repair service. Discover in this article the reasons why your refrigerator makes noise and the right solutions.

The different types of noise your fridge can have

Refrigerators, there are several types including the built-in fridge, the portable fridge, the mini fridge. No matter what fridge you own, it can emit noises of various kinds. That is to say, completely normal noises that come from the operation of the fridge and noises due to a malfunction of one of the parts of the fridge. For noise emitted naturally by your fridge, these are:

  • buzzing sounds that come from the operation of the compressor;
  • whistling due to air circulation;
  • squeaks due to the defrost system;
  • vibrations from the piping of the cooling system;
  • bubbling from the refrigerant;
  • crackles due to the cooling system.

What are the causes of noise in your fridge?

The noise that your fridge is in poor condition can come from several sources. It can be a:

Compressor problem

Sometimes the inner valves of your refrigerator’s compressor wear out. At this time, the compressor becomes defective and has trouble circulating the gas. This failure of the compressor causes the excess frost which in turn will rub the turbine at the level of the fan hence the birth of the noise that is heard.

Positioning shelves

The incorrect positioning of the different shelves can also cause noise in your fridge. Indeed, it should be emphasized that when the compressor of the fridge is running and the shelves at their levels are not well fixed, it causes noise. Also, the regular and frequent movement of these shelves can make them unstable hence the noises.

Thermostat malfunction

Noise in your fridge can also come from a problem with the thermostat. When it is damaged, it creates the non-regulation of the temperature of the fridge. If the temperature of the fridge is not regulated, there is an accumulation of frost due to excess cold. The frost in contact with the fan turbine gives rise to the noise you hear in your fridge.

Several reasons such as the failure of the electronic board, the malfunction of the fans, or the light can also be the cause of the noise you hear in your fridge.

Solutions to stop the noise of your fridge

Several solutions are available to you once you have identified the causes of the noise of your refrigerator. At each difficulty, an adequate solution that will lighten the task enormously. To solve the problem with the compressor, consider changing it by asking for advice from an authorized technician. He will advise you on the quality of the device you will need.

As for the incorrect positioning of your shelves, make a check through which you will ensure their stability. The bins and shelves once back in the right position, you will see that the noise will stop. To avoid noise from the thermostat, you must first perform a check. This verification will consist of testing the continuity of the thermostat; once this is done if the thermostat is really damaged, replace it.

Who to call for appliance repair?

When you have, by your means, tried to regularize what is happening in your refrigerator and the noise persists, call a specialist in fridge repair. The latter will come to make his diagnosis and identify the real problem. You can also use a specialized company that offers several services, namely residential installation, Laval installation and home installation of your household appliances.

Apart from installation, it is also specialized in fridge or fridge repair, commercial repair and industrial repair. If you live in Montreal or Quebec, a Quebec City repair service or Montreal repair service is also available. You will undoubtedly be satisfied with these different services.

What to do with your old appliances before a move?

Moves are generally delicate processes that involve taking into account multiple parameters. In particular, they give the opportunity to discover all its household appliances. Moving involves organizing your belongings and packing them for transportation.

During this process, the concern about what to do with old appliances is almost unavoidable. Discover the good arrangements to take in this context to move!

The different ways to organize old appliances

appliance repair

Household appliances pay for themselves over the course of use. Before moving, it is recommended to perform an audit. It allows you to discover all the devices and their respective status in order to make the right decisions. Here are some good steps to take for a good management of these devices during a move.

Repair

After separating the small appliances from the large ones, it is necessary to check that each one is functional or not. Devices that have malfunctions should be set aside. You can repair them by using a specialized company like A Plus Repair. It takes care of the repair of machines and parts for household appliances.

You will be able to take advantage of the services of industrial repairs, home and office installations. This specialist makes a diagnosis and repairs to appliances such as the stove, washer, air conditioners, refrigerator and dishwasher. You have the option to repair the appliance or refrigeration process rather than throw it away.

This poses an even greater problem when these elements are released into the wild. Indeed, some of this equipment contains polluting materials. Repairing a refrigerator allows it to be recycled and used for a variety of purposes.

Whether it’s a repair in Montreal or an installation in Laval, you can trust a real specialist in the region. You also have the best guarantees for a repair in Quebec City.

Donate, sell or recycle devices

Recycling repaired appliances is a good solution. You can take your devices to an electronics store. There are many WEEE (Waste Electrical and Electronic Equipment) stores. The deposit can be done at the center closest to you.

In addition to recycling, it is often possible to sell a household appliance. You could take images and publish them on resale sites. Interested parties can contact you to purchase it. Supplementing money to buy a new appliance is sometimes an option.

The other alternative is to take advantage of the marketing offers offered by equipment sellers. The supplier takes back the old device and allows to buy a new one. You also have the option of donating the equipment to charities. People with modest incomes will be able to equip themselves thanks to your gesture.

In addition to improving comfort within some families, such a donation can contribute to job creation. Some organizations take care of the repair of equipment before reselling it.

Drop off old equipment at the garbage dump

It is possible to deposit your broken or non-functional devices at the garbage dump. It is a place authorized to receive this kind of equipment. After the deposit, the appliances are transported to the sorting centers. Then they undergo the necessary treatments in order to be recycled.

This way of doing things makes it possible not to expose oneself to fines. People who leave appliances on the street are exposed. It is better to put them directly in the garbage dump. This gesture is inexpensive and more ecological.

Optimize the move

After the dispatch of the appliances, it is necessary to organize the remaining appliances to move safely. Indeed, the weight of some equipment can increase the bill. It is recommended to inform the moving agency in advance. It will take into account heavy objects when drawing up the estimate.

An object is considered heavy when it weighs more than 100 kilos. When the company is informed, it makes its arrangements and applies a reasonable additional cost. You have the assurance that your equipment will not be left on site for lack of handling means.

In addition, prepare the devices for transport. You can pack small appliances in a protective layer. It will be necessary to empty the inside of the fridge, dishwasher, washing machine, etc.

What about the new installation

After getting rid of the aging appliances, you have to think about setting up the remaining ones in your new home. The ideal is to call on a specialized professional like A Plus Repair. The company takes care of the residential installation and a multitude of other similar works.

It offers a high quality service with the necessary legal guarantees. You may be compensated in case of damage. In addition, it is possible to replace donated equipment. New appliances are very recommended to optimize the level of comfort. Choose energy-efficient appliances that comply with ecological standards.
If you are in your process of reflecting on your move we recommend that you call on moving professionals in Montreal,they will guarantee the proper handling of your electrical appliances to avoid any breakage.

How does a propane refrigerator work?

The propane refrigerator is a device powered by profane gas that does not require electricity. It then represents a good alternative to the conventional refrigerator in places where a power outlet is not available. The propane fridge is therefore widely used in motorhomes, shelters or cottages. But, how does it work? Follow us to find out!

Features of a propane refrigerator

Young couple who select a propane refrigerator
Propane refrigerators do not have moving parts. They are only powered by the layman and do not require an external power source to operate. Unlike electric refrigerators that need a coolant to keep the cold cold, gas refrigerators only use heat to produce the cold.

Indeed, a propane refrigerator or absorption refrigerator works thanks to five (5) main elements. These are the generator, separator, condenser, evaporator and absorber. Each of these parts plays an important role in the refrigeration process.

Thus, the generator is the part of the propane refrigerator that produces heat. The separator allows to divide the gas and water. The condenser allows the high-pressure ammonia vapor to take its form as a pressure fluid. Thanks to the evaporator, the refrigerant becomes gaseous and cold. As for the absorber, it absorbs ammonia at the outlet of the evaporator.

Refrigeration process

The refrigeration process of the propane fridge is triggered by a propane flame. This flame heats the water and ammonia solution contained in the generator. When the mixture reaches a boiling point, it flows into the separator. At this level, ammonia gets rid of the water driven by its rise in pressure.

Then the ammonia gas rises and enters the condenser where it condenses to become liquid ammonia. In reality, the condenser uses metal coils that cool the gas and obtain a coolant. The liquid ammonia thus obtained arrives in the evaporator where it evaporates due to the hydrogen gas. This reaction causes cold temperatures in the refrigerator.

Finally, ammonia and hydrogen gas enter the absorber. At this stage, the mixture combines with the water collected in the separator. The ammonia therefore mixes again with the water to form a solution and release the hydrogen gas into the evaporator. To keep the contents of the refrigerator cold, this cycle is repeated continuously.

performance

Propane refrigerators are very efficient. But, their effectiveness varies depending on the propane tanks used. Indeed, to operate the gas fridge efficiently, the choice of the propane tank is very decisive. For example, with a standard propane tank, the refrigerator can run for 11 days.

Also, the performance of propane refrigerators depends on how you use them. Naturally, these devices take time to cool down at first. So, if you plan to travel with this type of fridge, it is necessary to feed it for 11 or even 12 hours before hitting the road. It is also recommended to turn it on using electricity the day before the trip.

In addition, for the good performance of your propane refrigerator, you must avoid exposing it to the sun’s rays. Also, avoid storing foods that will only lower the temperature and increase the cooling time. The refrigerator has no airflow except what you provide. It is then necessary to avoid opening it several times.

Advantages of the propane refrigerator

propane refrigerator in a modern kitchen

The propane refrigerator has several advantages. First of all, it saves money. Indeed, it does not require the use of electricity. Its use then makes it possible to reduce electricity consumption in a residential installation. It also saves risks of power outages that could affect your food stored in the fridge.

In addition, propane refrigerators make travel smoother. In reality, with this equipment, you can travel with your supplies safely. So you don’t have to spend your energy going to a grocery store when you arrive. You already have everything in your gas fridge.

In addition, these devices do not use a compressor. They work with the pressure from distillation. They are then less noisy than refrigerators that use electricity.

Maintenance

To avoid rust in the pipes and the consequences that can result, the propane refrigerator requires monitoring. For it to work optimally, it is therefore necessary to call on professionals to make a diagnosis regularly and ensure impeccable focus.

Also, if you notice a cooling problem in your propane fridge, it is better to call on refrigerator repairers. If it is necessary to carry out a new installation, they will also take care of it.

Why is my oven not cooking evenly?

You’ve carefully followed the instructions and preheated the oven, but when your food comes out, it’s overcooked in some places and still raw in others. Is your oven heating up but not baking? Are you looking to check your oven before calling in a professional to fix a problem that can cost hundreds of dollars? Does all this sound familiar to you? Maybe the heat in your oven isn’t evenly distributed. If you’re looking to understand why your oven heats up but doesn’t bake, read on.

My oven is heating but not baking: How do you make sure your oven isn’t cooking evenly?

If the edges of a dish are burned and the middle is almost soggy, it doesn’t necessarily mean that your oven isn’t baking evenly. Another reason could be that your oven is not properly adjusted. Over time, the internal temperature of the oven may no longer match the temperature set on the temperature button during installation.

Some steps to follow to know that baking is not uniform

If the oven is set to 176.7°C, but it heats up to 204.4°C, it is easy to explain that the outside of the dish is ready, but the inside is just starting to heat up. In the end, adjusting and readjusting the oven is a relatively easy decision.

After properly calibrizing your oven, the next logical step is to check the cooking methods. To do this, make a cake. Follow the instructions on the package as closely as possible. You will know that there is a problem if the cake does not cook entirely or if some parts cook more difficult than others.

How to proceed after diagnosis?

If you make your diagnosis and it turns out that the cooking of your oven is uneven and things get a little complicated, try to find the cause of the problem and call an oven repairer. You can contact APlus Repair, a company specializing in the repair of appliances, including ovens, and home installation. It is available for all your repairs, mainly in Quebec, Laval and Montreal.

Plausible causes of uneven cooking of your oven

If the cooking element is grilled, the oven heats up unevenly. When the oven is preheated, it is possible to visually check whether the elements are cooked or not. If the cooking (bottom) or browning (top) elements do not heat up properly, they must be replaced. Elements may also have visual defects that could indicate damage or wear.

In addition, the oven temperature sensor wears out over time. First check that the sensor is not in contact with the oven wall. If so, position it so that it does not touch the wall. You can also use an ohmmeter to verify that the sensor is working.

When the furnace temperature increases, the measuring resistance of the temperature sensor must also increase. If the temperature sensor is defective, you can replace it yourself, which will solve the problem immediately. In all other cases, you need to contact a specialist.

Also, ovens use different cooking methods. To solve this problem, you need to learn how to cook in the oven. Use the browning test to learn how to turn pans and food while cooking. Adjusting the rack and using different pans, for example, glass pans or pans with hot stones, will help to ensure even cooking.

How to remedy a non-uniform cooking of your oven?

A common cause of uneven cooking is obstruction of the airflow from your oven. However, if you cover the bottom grid with aluminum foil, it will limit air circulation and prevent your oven from baking evenly. Air circulation is crucial when cooking on multiple levels. Follow the grid suggestions in your device’s user manual to ensure good ventilation inside.

If you frequently open the oven door while cooking your food, the internal temperature drops. This can lead to longer cooking time and excessive browning of the top or bottom of cooked food. To avoid this, keep the oven door closed while cooking.

Finally, place your food in the middle of the shelf. The dough in the mold or tray should also be evenly distributed. This will give you an even distribution of heat. Do not change the position of the rack when the oven is hot.

 

My Oven Heats Up But Doesn’t Bake: Solutions and Practical Tips

oven does not bake

Why is my baking uneven in the oven?

There are several factors that can cause uneven cooking in an oven. One of the common problems is poor heat distribution inside the oven. This can be due to faulty heating elements, clogged ductwork, or degraded insulation. When heat isn’t evenly distributed, you can end up with food that is cooked unevenly. It is important to have your oven inspected by a professional to diagnose and fix the problem.

Why are my cakes burnt on the outside and raw on the inside?

If your cakes are burnt on the outside and raw on the inside, it may be due to improper oven temperature. A faulty thermostat can cause overheating or undercooking. Be sure to check the accuracy of your oven temperature by using an independent thermometer. If the problem persists, it may indicate a need for thermostat repair.

How can I fix uneven baking issues in my oven?

To fix uneven cooking issues, start by making sure your oven is level. An unevenly positioned oven can cause temperature fluctuations. Next, make sure the heating elements are working properly. If your oven has a faulty heating element, it can cause cold spots. If you continue to experience problems, it’s best to call in an oven repair technician.

Why is my cooking uneven even though I’ve turned my dishes?

Sometimes, even when turning your dishes, you may experience problems with uneven cooking. This can be due to internal problems in the oven, such as clogged ducts or faulty heating elements. Even with proper rotation, if the heat is not properly distributed, you can achieve uneven results. A professional inspection of the oven can help resolve this issue.

How can I prevent uneven cooking in my oven?

Preventing uneven cooking starts with regular maintenance of your oven. Be sure to clean the heating elements and ductwork to ensure proper air circulation. Use an independent thermometer to check the internal temperature of your oven and make sure it’s correct. Finally, if you frequently experience problems with uneven cooking despite these measures, consider having your oven repaired by a stove repair professional.

Choosing repair: a greener decision

In a world where climate change is increasingly worrying, all means are good to protect nature. To do this, several ecological gestures are recommended.

Reparation is one of the latter even if it is not yet adopted by all. Discover in this article some arguments that attest that repair is a gesture with a heavy ecologicalsense.

Repair for the protection of nature reserves

Appliances, especially household appliances for their construction, require the consumption of a significant amount of natural resources.

Indeed, whether they are electrical devices or electronic devices, certain natural resources are essential for their manufacture. These include rare metals such as cobalt, lithium, tantalum, and also rare metals such as gold, palladium and silver.

The extraction of these materials causes significant damage to theenvironment. One of these damages is the depletion and dwindling of these resources that could impact the quality of future devices. A machine repair would therefore avoid harming these resources.

Similarly, to extract minerals from the subsoil,it is essential to dig to a certain depth. This act has harmful consequences for the environment. These include:

  • soil erosion, which is very important in areas covered with plants;
  • soil leaching, which is a source of contamination of plant species and water by contaminants;
  • the transport of heavy metals and other contaminants by air;
  • Etc.

More generally, the abusive cutting of trees is deplorable. With a repair devices for example, you increase the chances of certain plant species surviving. A small gesture yes! But full of meaning for nature.

Repair to extend service life

While repair is a way to protect natural resources, it also extends the lifespan. In reality, repairing is somehow extending the life of a device. Some devices with planned obsolescence can be repaired by simply changing a room.

To avoid throwing away devices that can still be used or are repairable, it is advisable to carry out their diagnosis. This process will make it possible to reveal any breakdowns or points of malfunction in order to propose possible solutions.

Reducing bulky waste

Electrical and electronic devices generate countless amounts of waste. But unlike other categories of waste,they are difficult to manage.

Their dangerousness is important and recycling them involves well-defined procedures. Faced with this state of affairs, one of the recommended solutions is reuse. In fact, to reuse a device is to give it the opportunity to live again.

At the same time, we avoid throwing a product with a hazardous residue into nature at least while we find an adequate management method adapted to this type of waste.

Promoting waste transformation

Depending on the installation in place, the devices can suffer different types of damage. Whether it is a home installation of a new dryer, new bulky waste will be produced.

Opting for the repair of a machine, makes it possible to make a potential waste, a new product. It is a process that therefore promotes responsible and intelligent waste management.

Repair to spend less economic resources

Repair is a way to contribute to sustainable development. Indeed, the latter is based on three aspects. These are:

  • the ecological and environmental aspect;
  • the social aspect;
  • the economic aspect.

The concert of these elements is naturally favourable to the protection of nature.

Clever purchases and operations

In the perspective of a repair, it is possible to carry out beautiful operations. As proof, it is more beneficial on a plan to replace a defective part on a device than to change the latter.

However, in a case where the damage is too great, it may be better to opt for a replacement. In addition, in the collective movement for the protection of nature, several companies and centers offer discounts to all those who opt for the purchase of ecological goods. It is therefore possible to perform a beautiful operation at a lower cost.

In short, device repair brings many benefits. Opting for repair rather than change when possible is an ecological act.